The Ultimate Cheat Sheet On Energy Saving

DATE: Dec, 12   COMMENTS: 0   AUTHOR: Allan Azarola

It’s back-to-school time and everyone could use a good cheat sheet. Learn how to spend less and energy all year long with our useful home cooling sheet sheet.

  1. Update your thermostat

If you don’t have a programmable thermostat, then think about getting one. They will help heat and cool your home more efficiently, saving you money and energy. You can Select a thermostat which can be program for single days, weekdays, and weekends:

Unless there is always someone home to adjust the thermostat, you will want a programmable one to correct itself for you. There are many alternatives available to you, such as”smart thermostats,” that can”learn” you program and adjust accordingly.

Shop around first and then call Penguin Air to install it for you, although you can DIY it if you understand what you are doing. You are going to want to be certain your thermostat is not in the wrong location.

Your thermostat needs to be completely flat and away from any heat sources, such as lamps, sunlight, and appliances. Otherwise, your thermostat will read the incorrect temperature and then turn your HVAC system on unnecessarily.

For maximum energy savings, we recommend setting your thermostat to 78 F while in home and no higher than 85 F whilst away from the home.

  1. Insulate Your House

One of the biggest energy-suckers in your home is your attic and basement, where insulating material can normally be dramatically enhanced. Start looking for areas around your home that could use greater insulation.

A good approach to check for air leaks is by simply holding up a lit incense stick to areas where you suspect a leak. Look around your foundation, windows, doors, baseboards, fireplaces, and where utilities enter the construction. You’ll also want to inspect and seal leaks on your air ducts.

Ensure that you are sealing cracks and openings to prevent warm air from slipping in and cold air from sneaking out. Utilize weatherproof caulk for almost any openings smaller than 1/4 inch and expandable foam spray for any gaps bigger than that.

Update the weatherstripping on your doors and windows and consider installing door sweeps to all the doors that lead outside.

Don’t neglect the loft! Watch this movie to learn how to measure the insulation levels in your loft:

Use this U.S. Department of Energy Insulation Guide to understand just how much insulation you have to have in your loft (R-value).

  1. Use Fans

Ceiling fans can allow you to save money on both heating and cooling costs. According to the S. Department of Energy, using a ceiling fan on, you can turn the thermostat up about 4 F without feeling any decrease in relaxation.

Just remember that ceiling fans don’t really cool a room, they just make you feel cooler, so turn off all fans when not in the room. Fans can also be helpful for ventilating the house to help control mold, humidity, and moisture. If your oven and bathroom fans aren’t working, have them mended.

In case you have an attic, then you may also need to think about attic fans, that will ventilate the intense temperatures outdoors, particularly important when you’ve got your HVAC unit up there.

  1. Maintain your HVAC system

There are numerous things you can do as a homeowner to maintain and fix your air heating and cooling system, however the best way to make certain you have an efficient system is by scheduling a HVAC service in Las Vegas, NV, or nearby, twice a year (once in the autumn for heating and once in the spring for cooling).

Having a professional HVAC technician inspect and tune-up your system bi-annually can help extend its lifespan and ensure it is operating at peak efficiency. During these visits, the technician will clean components, check for any leaks or wear, and make necessary adjustments to keep the system functioning properly. Regular maintenance helps prevent unexpected breakdowns and can catch small issues before they turn into larger, more costly repairs.

By investing a modest amount in these routine service appointments, you can save significantly on your monthly energy bills and avoid the headache of an abrupt system failure. Wondering how to locate these experts? For starters, you can ask around for recommendations from your friends or relatives. Alternatively, you can consider visiting or similar platforms to contact professionals on the Web.

  1. Shade your home, condenser unit, and windows

Solar heat gain is one of the main reasons why you need air conditioning in the first location. If it’s possible to reduce the quantity of heat your house and windows get from sunlight, you won’t have to use your air conditioner as often.

We advocate planting deciduous trees, which lose their leaves in the fall, around the home to add value to the property and supply valuable shade.

Window shades and coverings can radically reduce heat gain through your windows. Consider awnings, thermal drapes, blinds, and other energy-efficient window remedies. If you live in an area where it gets cool at night, look at opening a window to allow the cool atmosphere in. Make certain all doors and windows are shut during the hotter times daily.

  1. Use appliances , and during cooler hours

Appliances use a good deal of electricity and create quite a little heat. Contemplate air drying your dishes and clothes to reduce the quantity of the time that your appliances are on. If your appliances are old, they may be leeching electricity from your home causing more issues for your energy output, if so, you will need to get them fixed or replaced. You can check with your home warranty company to see if they are covered. If you are not covered you can go onto websites such as to see about getting that started.

If you do need to use appliances, such as ovens and grills, look at running them in the first or latest hours of the afternoon, when temperatures outside aren’t too significant.

  1. Change your light bulbs

Another heat-producing thing on your home are your bulbs. Incandescent light bulbs can produce a great deal of heat, which can at times cause fires if you can find combustibles too near the bulb.

In reality, of all of the electricity used for incandescent lighting, just around 10-15% is used to generate light — the remainder generates warmth. Think about replacing your light bulbs with LEDs or CFLs, which use a good deal less energy, leading to a whole lot less heat. LEDS use around 3.4 BTUs/hour, while incandescents utilize around 85 BTUs/hour!

  1. Consider replacing your air conditioning unit

Your HVAC system accounts for around 50 percent of your home’s overall energy usage, therefore it’s vital that you have an energy-efficient system that’s dependable and long-lasting.

If your HVAC system is older than 15 decades, it may be time for a replacement rather than an Air Conditioning Repair. Consider the era, efficiency (SEER evaluation ), and price of repairs when thinking about replacing your air conditioner.

Choosing a new ac system isn’t the tricky part though — choosing your HVAC contractor is! Buying a new heating and cooling process is an important investment. Whether you opt for a traditional HVAC system or perhaps a Ductless air conditioning system, be sure you have the right person to install it. This ensures that the new system is installed properly and will work efficiently.

  1. Reduce heat-producing actions

Tasks, such as cooking and showering, can introduce a lot of undesirable heat and humidity to the atmosphere. Look at using heat-producing appliances during the night or at the early morning when temperatures aren’t as high.

Computers, stereos, TVs, hair dryers, irons, dishwashers, and other things all contribute to the warmth in your property. Take showers instead of baths and think about taking NAVY showers, which consists of getting wet, turning off the water as you lather, then turning it back on again to rinse off.

  1. Lower water heat temperature

The conventional temperature setting for hot water heaters is 140 F, but this temperature is really too hot for any normal use. In fact, it may even result in burns and scalding, especially in the event that you’ve got young kids at home. A much safer and more effective setting is 120 F. Not only will you save money and energy, but you probably won’t even see a difference.

(Visit to see best Energy Saving product)

It's only fair to share...Share on facebook
Share on google
Share on twitter
Share on linkedin